RADIX - PAA - Multi-Purpose Disinfection

COMPOSITION

● Peracetic acid - 5%

● Hydrogen Peroxide - 10%

● Inert Ingredients - 85%

ACTIVITY

● Broad Spectrum: Bactericidal, Fungicidal, Virucidal & Sporicidal

APPLICATION USAGE DIRECTIONS

● RADIX PAA - PAA is formulated to use after dilution Follow the user manual for instructions on how to load the bottles into the machine or AER. When connecting the bottles please pay attention to ensure each bottle is connected securely to the correct port. Do not operate the AER unless Base and Additive are connected correctly. Instruments must be thoroughly pre-cleaned using an appropriate enzymatic detergent before placing them into the washer-disinfector. The RADIX PAA Residual Test Strip confirms that RADIX PAA Cold Sterilant concentration has been reduced to safe levels during rinse procedures. There is no need for Time-consuming test procedures or the hassle of sending the sample to outside laboratories.

● Disinfection and Sterilization - Presoaking time will vary depending upon the amount of accumulated bio-burden on the instrument and the length of time the bio-burden has been allowed to dry before cleaning/decontamination begins. Additional manual or automated cleaning steps may be required. It is recommended on average to soak instruments for the minimum of 10 minutes in 2% RADIX ZYME solution in DM water before further reprocessing disinfection and sterilization.